MAY-2001T Input on-line density and concentration meter
Product introduction：
MAYZUM MAY-2001T input on-line density meter is a continuous on-line measurement of liquid density instrument, mainly used in industrial process automation control. The corresponding 4-20mA or 485 analog signal is generated according to the media density change, and the digital signal can be converted to facilitate remote calibration and monitoring. Depending on the industrial process, direct reading is displayed: alcohol (Vol), Baume (° Be), plato (plato) and concentration percentage (%), etc. It can be widely used in industrial sites such as on-site pipelines, loose ports or closed storage tanks, and can continuously and real-time online measure the liquid density of open tanks or tanks.
Installation mode：
Technical parameter：
Product model | MAY-2001T |
Density (concentration) accuracy | 0.001 g/cm3 (0.19%). |
Range of work | 0 ~ 2.2 g/cm after. 0 ~ 100% |
Output signal | 4-20mA, RS485, switching quantity, etc |
Process temperature | Standard: -25℃~+120℃, custom: -25C~+150℃ |
Ambient temperature | - 25 ℃ ~ + 85 ℃ |
Temperature coefficient | 20ppm/°C(after correction) |
Material for receiving liquid | ZSS316L, □ Hastelloy, mouth ceramic, □PTFE Teflon |
Working pressure | Standard within 2.5MPa, mouth special custom within 6.3MPa |
Type of process connection | Input type |
Probe size | Standard 130mm, can be customized 0 to 3 meters insertion depth |
Explosion-proof certification | Ex dblIC T6 Gb |
Power Requirements | DC24V,100mA |
Electrical interface | M20 * 1.5 |
Viscosity range | 0-2000cP(for higher viscosity choose MAY-5001S) |
Product model | MAY-2001T |
Density (concentration) accuracy | 0.001 g/cm3 (0.19%). |
Range of work | 0 ~ 2.2 g/cm after. 0 ~ 100% |
Output signal | 4-20mA, RS485, switching quantity, etc |
Process temperature | Standard: -25℃~+120℃, custom: -25C~+150℃ |
Ambient temperature | - 25 ℃ ~ + 85 ℃ |
Temperature coefficient | 20ppm/°C(after correction) |
Material for receiving liquid | ZSS316L, □ Hastelloy, mouth ceramic, □PTFE Teflon |
Working pressure | Standard within 2.5MPa, mouth special custom within 6.3MPa |
Type of process connection | Input type |
Probe size | Standard 130mm, can be customized 0 to 3 meters insertion depth |
Explosion-proof certification | Ex dblIC T6 Gb |
Power Requirements | DC24V,100mA |
Electrical interface | M20 * 1.5 |
Viscosity range | 0-2000cP(for higher viscosity choose MAY-5001S) |
![微信客服 扫码咨询](javascript:Site.hoverQrCode("//50004713.s21i.huaweicloudsite.cn/2/ABUIABACGAAg3aHGsgYo7KeT3wMwnQU4jwU.jpg",this,{"tips":"wechat"});){kind=link}